MC68HC08AZ60 Datasheet, PDF (201/452 Pages) Motorola, Inc – Advance Information

SCI Control
Register 3
Freescale Semiconductor, Inc.
Serial Communications Interface Module (SCI)
I/O Registers
SCI control register 3:
• Stores the ninth SCI data bit received and the ninth SCI data bit to
be transmitted.
• Enables the following interrupts:
– Receiver overrun interrupts
– Noise error interrupts
– Framing error interrupts
– Parity error interrupts
Address: $0015
Bit 7
6
5
4
3
2
1
Bit 0
Read: R8
T8
R
Write:
R
ORIE NEIE FEIE PEIE
Reset: U
U
0
0
0
0
0
0
= Unimplemented
R = Reserved
U = Unaffected
Figure 13. SCI Control Register 3 (SCC3)
R8 — Received Bit 8
When the SCI is receiving 9-bit characters, R8 is the read-only ninth
bit (bit 8) of the received character. R8 is received at the same time
that the SCDR receives the other 8 bits.
When the SCI is receiving 8-bit characters, R8 is a copy of the eighth
bit (bit 7). Reset has no effect on the R8 bit.
T8 — Transmitted Bit 8
When the SCI is transmitting 9-bit characters, T8 is the read/write
ninth bit (bit 8) of the transmitted character. T8 is loaded into the
transmit shift register at the same time that the SCDR is loaded into
the transmit shift register. Reset has no effect on the T8 bit.
29-sci
MOTOROLA
MC68HC08AZ60 — Rev 1.0
Serial Communications Interface Module (SCI)
201
For More Information On This Product,
Go to: www.freescale.com