MC68HC08AZ60 Datasheet, PDF (337/452 Pages) Motorola, Inc – Advance Information

Freescale Semiconductor, Inc.
MSCAN Controller (MSCAN08)
Programmer’s Model of Control Registers
MSCAN08 Module
Control Register 0
Address: $0500
Bit 7
6
5
4
3
2
1
Bit 0
Read: 0
0
0
SYNCH
SLPAK
TLNKEN
SLPRQ SFTRES
Write:
Reset: 0
0
0
0
0
0
0
1
= Unimplemented
Figure 15. Module Control Register 0 (CMCR0)
SYNCH — Synchronized Status
This bit indicates whether the MSCAN08 is synchronized to the CAN
bus and as such can participate in the communication process.
1 = MSCAN08 synchronized to the CAN bus
0 = MSCAN08 not synchronized to the CAN bus
TLNKEN — Timer Enable
This flag is used to establish a link between the MSCAN08 and the
on-chip timer (see Timer Link on page 324).
1 = The MSCAN08 timer signal output is connected to the timer
input.
0 = The port is connected to the timer input.
SLPAK — Sleep Mode Acknowledge
This flag indicates whether the MSCAN08 is in module internal sleep
mode. It shall be used as a handshake for the sleep mode request
(see MSCAN08 Sleep Mode on page 321). If the MSCAN08 detects
bus activity while in Sleep mode, it clears the flag.
1 = Sleep – MSCAN08 in internal sleep mode
0 = Wakeup – MSCAN08 is not in Sleep mode
33-mscan
MOTOROLA
MC68HC08AZ60 — Rev 1.0
MSCAN Controller (MSCAN08)
337
For More Information On This Product,
Go to: www.freescale.com