MC68HC08AZ60 Datasheet, PDF (282/452 Pages) Motorola, Inc – Advance Information

I/O Ports
Freescale Semiconductor, Inc.
DDRA[7:0] — Data Direction Register A Bits
These read/write bits control port A data direction. Reset clears
DDRA[7:0], configuring all port A pins as inputs.
1 = Corresponding port A pin configured as output
0 = Corresponding port A pin configured as input
NOTE: Avoid glitches on port A pins by writing to the port A data register before
changing data direction register A bits from 0 to 1.
Figure 4 shows the port A I/O logic.
READ DDRA ($0004)
WRITE DDRA ($0004)
RESET
DDRAx
WRITE PTA ($0000)
PTAx
PTAx
READ PTA ($0000)
Figure 4. Port A I/O Circuit
When bit DDRAx is a logic 1, reading address $0000 reads the PTAx
data latch. When bit DDRAx is a logic 0, reading address $0000 reads
the voltage level on the pin. The data latch can always be written,
regardless of the state of its data direction bit. Table 1 summarizes the
operation of the port A pins.
MC68HC08AZ60 — Rev 1.0
282
I/O Ports
For More Information On This Product,
Go to: www.freescale.com
4-ioports
MOTOROLA