MC68HC08AZ60 Datasheet, PDF (138/452 Pages) Motorola, Inc – Advance Information

Break Module
Freescale Semiconductor, Inc.
TIM During Break
Interrupts
A break interrupt stops the timer counter.
COP During Break The COP is disabled during a break interrupt when V_Hi is present on the
Interrupts
RST pin.
Low-Power Modes
The WAIT and STOP instructions put the MCU in low power-consump-
tion standby modes.
Wait Mode
If enabled, the break module is active in wait mode. The SIM break
stop/wait bit (SBSW) in the SIM break status register indicates whether
wait was exited by a break interrupt. If so, the user can modify the return
address on the stack by subtracting one from it. (See
System Integration Module (SIM) on page 83).
Stop Mode
The break module is inactive in stop mode. The STOP instruction does
not affect break module register states. A break interrupt will cause an
exit from stop mode and sets the SBSW bit in the SIM break status
register.
MC68HC08AZ60 — Rev 1.0
138
Break Module
For More Information On This Product,
Go to: www.freescale.com
4-brk
MOTOROLA