MC68HC08AZ60 Datasheet, PDF (254/452 Pages) Motorola, Inc – Advance Information

Freescale Semiconductor, Inc.
Timer Interface Module B (TIMB)
(TBSC0) controls and monitors the PWM signal from the linked
channels. MS0B takes priority over MS0A.
Clearing the toggle-on-overflow bit, TOVx, inhibits output toggles on
TIMB overflows. Subsequent output compares try to force the output to
a state it is already in and have no effect. The result is a 0% duty cycle
output.
Setting the channel x maximum duty cycle bit (CHxMAX) and clearing
the TOVx bit generates a 100% duty cycle output. (See TIMB Channel
Status and Control Registers on page 262.)
Interrupts
The following TIMB sources can generate interrupt requests:
• TIMB overflow flag (TOF) — The TOF bit is set when the TIMB
counter value rolls over to $0000 after matching the value in the
TIMB counter modulo registers. The TIMB overflow interrupt
enable bit, TOIE, enables TIMB overflow CPU interrupt requests.
TOF and TOIE are in the TIMB status and control register.
• TIMB channel flags (CH1F–CH0F) — The CHxF bit is set when an
input capture or output compare occurs on channel x. Channel x
TIMB CPU interrupt requests are controlled by the channel x
interrupt enable bit, CHxIE.
MC68HC08AZ60 — Rev 1.0
254
Timer Interface Module B (TIMB)
For More Information On This Product,
Go to: www.freescale.com
12-timb
MOTOROLA