MC9S12HY64 Datasheet, PDF (726/792 Pages) Freescale Semiconductor, Inc – S12 Microcontrollers

Electrical Characteristics
Table A-9. Peripheral Configurations for Run & Wait Current Measurement
Peripheral
MSCAN
SPI
SCI
PWM
IIC
LCD
MC
ATD
DBG
TIM0, TIM1
COP & RTI
Configuration
configured to loop-back mode using a bit rate of 1Mbit/s
configured to master mode, continously transmit data (0x55 or 0xAA) at
1Mbit/s
configured into loop mode, continously transmit data (0x55) at speed of
57600 baud
configured to toggle its pins at the rate of 40kHz
operate in master mode and continuously transimit data(0x55 or 0xAA) at
100Kbits/s
configured to 244Hz frame frequency, 1/4 Duty, 1/3 Bias with all FP/BP
enabled and all segment on
configured to full H-bridge mode MCPER=0x3FF, 1/2fbus motor controller
timer counter clock, MCDC=0x20
the peripheral is configured to operate at its maximum specified fre-
quency and to continuously convert voltages on all input channels in
sequence.
the module is enabled and the comparators are configured to trigger in
outside range.The range covers all the code executed by the core.
the peripheral shall be configured to output compare mode, pulse accu-
mulator and modulus counter enabled.
enabled
Table A-10. Run and Wait Current Characteristics
Conditions are shown in Table A-8 and Table A-9 unless otherwise noted, V_DD35=5.5v, 150°C
Num C
Rating
Symbol
Min
Typ
1 P IDD Run Current
2 P IDD Wait Current
I_DDR
17
I_DDW
9.5
Max
Unit
20
mA
12
mA
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
726
Freescale Semiconductor