|
MC9S12HY64 Datasheet, PDF (300/792 Pages) Freescale Semiconductor, Inc – S12 Microcontrollers | |||
|
◁ |
Analog-to-Digital Converter (ADC12B8CV1) Block Description
8.3.2.10 ATD Input Enable Register (ATDDIEN)
Module Base + 0x000C
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R0
0
0
0
0
0
0
0
W
IEN[7:0]
Reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 8-12. ATD Input Enable Register (ATDDIEN)
Read: Anytime
Write: Anytime
Table 8-19. ATDDIEN Field Descriptions
Field
7â0
IEN[7:0]
Description
ATD Digital Input Enable on channel x (x= 7, 6, 5, 4, 3, 2, 1, 0) â This bit controls the digital input buffer from
the analog input pin (ANx) to the digital data register.
0 Disable digital input buffer to ANx pin
1 Enable digital input buffer on ANx pin.
Note: Setting this bit will enable the corresponding digital input buffer continuously. If this bit is set while
simultaneously using it as an analog port, there is potentially increased power consumption because the
digital input buffer maybe in the linear region.
8.3.2.11 ATD Compare Higher Than Register (ATDCMPHT)
Writes to this register will abort current conversion sequence.
Read: Anytime
Write: Anytime
Module Base + 0x000E
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R0
0
0
0
0
0
0
0
W
CMPHT[7:0]
Reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 8-13. ATD Compare Higher Than Register (ATDCMPHT)
Table 8-20. ATDCMPHT Field Descriptions
Field
Description
7â0
CMPHT[7:0]
Compare Operation Higher Than Enable for conversion number n (n= 7, 6, 5, 4, 3, 2, 1, 0) of a Sequence
(n conversion number, NOT channel number!) â This bit selects the operator for comparison of conversion
results.
0 If result of conversion n is lower or same than compare value in ATDDRn, this is ï¬agged in ATDSTAT2
1 If result of conversion n is higher than compare value in ATDDRn, this is ï¬agged in ATDSTAT2
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
300
Freescale Semiconductor
|
▷ |