English
Language : 

MC9S12HY64 Datasheet, PDF (432/792 Pages) Freescale Semiconductor, Inc – S12 Microcontrollers
Serial Communication Interface (S12SCIV5)
12.3.2.6 SCI Control Register 2 (SCICR2)
Module Base + 0x0003
7
R
TIE
W
Reset
0
Read: Anytime
Write: Anytime
6
5
4
3
2
TCIE
RIE
ILIE
TE
RE
0
0
0
0
0
Figure 12-9. SCI Control Register 2 (SCICR2)
Table 12-10. SCICR2 Field Descriptions
1
RWU
0
0
SBK
0
Field
7
TIE
6
TCIE
5
RIE
4
ILIE
3
TE
2
RE
1
RWU
0
SBK
Description
Transmitter Interrupt Enable Bit — TIE enables the transmit data register empty flag, TDRE, to generate
interrupt requests.
0 TDRE interrupt requests disabled
1 TDRE interrupt requests enabled
Transmission Complete Interrupt Enable Bit — TCIE enables the transmission complete flag, TC, to generate
interrupt requests.
0 TC interrupt requests disabled
1 TC interrupt requests enabled
Receiver Full Interrupt Enable Bit — RIE enables the receive data register full flag, RDRF, or the overrun flag,
OR, to generate interrupt requests.
0 RDRF and OR interrupt requests disabled
1 RDRF and OR interrupt requests enabled
Idle Line Interrupt Enable Bit — ILIE enables the idle line flag, IDLE, to generate interrupt requests.
0 IDLE interrupt requests disabled
1 IDLE interrupt requests enabled
Transmitter Enable Bit — TE enables the SCI transmitter and configures the TXD pin as being controlled by
the SCI. The TE bit can be used to queue an idle preamble.
0 Transmitter disabled
1 Transmitter enabled
Receiver Enable Bit — RE enables the SCI receiver.
0 Receiver disabled
1 Receiver enabled
Receiver Wakeup Bit — Standby state
0 Normal operation.
1 RWU enables the wakeup function and inhibits further receiver interrupt requests. Normally, hardware wakes
the receiver by automatically clearing RWU.
Send Break Bit — Toggling SBK sends one break character (10 or 11 logic 0s, respectively 13 or 14 logics 0s
if BRK13 is set). Toggling implies clearing the SBK bit before the break character has finished transmitting. As
long as SBK is set, the transmitter continues to send complete break characters (10 or 11 bits, respectively 13
or 14 bits).
0 No break characters
1 Transmit break characters
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
432
Freescale Semiconductor