|
MC9S12HY64 Datasheet, PDF (281/792 Pages) Freescale Semiconductor, Inc – S12 Microcontrollers | |||
|
◁ |
Chapter 8
Analog-to-Digital Converter (ADC12B8CV1)
Block Description
Revision History
Version Revision
Number Date
V01.00 25 July 2007
V01.01 14 Sept 2007
Effective
Date
25 July 2007
14 Sept 2007
V01.02 1 Oct 2007 1 Oct 2007
V01.03
V01.04
9 Oct 2007
30 Apr 2008
9 Oct 2007
30 Apr 2008
Author
Description of Changes
Initial version
Added reserved registers at the end the memory map.
Added following mention where applies:
(n conversion number, NOT channel number!)
Modiï¬ed table âAnalog Input Channel Select Codingâ due to
new customer feature (SPECIAL17).
Updated document for 8 channels.
8.1 Introduction
The ADC12B8C is a 8-channel, 12-bit, multiplexed input successive approximation analog-to-digital
converter. Refer to device electrical speciï¬cations for ATD accuracy.
8.1.1 Features
⢠8-, 10-, or 12-bit resolution.
⢠Conversion in Stop Mode using internally generated clock
⢠Automatic return to low power after conversion sequence
⢠Automatic compare with interrupt for higher than or less/equal than programmable value
⢠Programmable sample time.
⢠Left/right justiï¬ed result data.
⢠External trigger control.
⢠Sequence complete interrupt.
⢠Analog input multiplexer for 8 analog input channels.
⢠Special conversions for VRH, VRL, (VRL+VRH)/2.
⢠1-to-8 conversion sequence lengths.
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
Freescale Semiconductor
281
|
▷ |