MC9S12HY64 Datasheet, PDF (549/792 Pages) Freescale Semiconductor, Inc – S12 Microcontrollers

32 KByte Flash Module (S12FTMRC32K1V1)
Table 15-39. Program P-Flash Command FCCOB Requirements
CCOBIX[2:0]
FCCOB Parameters
000
0x06
Global address [17:16] to
identify P-Flash block
001
Global address [15:0] of phrase location to be programmed¹
010
Word 0 program value
011
Word 1 program value
100
Word 2 program value
101
Word 3 program value
1 _{Global address [2:0] must be 000}
Upon clearing CCIF to launch the Program P-Flash command, the Memory Controller will program the
data words to the supplied global address and will then proceed to verify the data words read back as
expected. The CCIF flag will set after the Program P-Flash operation has completed.
Table 15-40. Program P-Flash Command Error Handling
Register
Error Bit
Error Condition
Set if CCOBIX[2:0] != 101 at command launch
ACCERR
Set if command not available in current mode (see Table 15-27)
Set if an invalid global address [17:0] is supplied¹
FSTAT
FPVIOL
Set if a misaligned phrase address is supplied (global address [2:0] != 000)
Set if the global address [17:0] points to a protected area
MGSTAT1 Set if any errors have been encountered during the verify operation
MGSTAT0
Set if any non-correctable errors have been encountered during the verify
operation
1 _{As defined by the memory map for FTMRC64K1.}
15.4.5.6 Program Once Command
The Program Once command restricts programming to a reserved 64 byte field (8 phrases) in the
nonvolatile information register located in P-Flash. The Program Once reserved field can be read using the
Read Once command as described in Section 15.4.5.4. The Program Once command must only be issued
once since the nonvolatile information register in P-Flash cannot be erased. The Program Once command
must not be executed from the Flash block containing the Program Once reserved field to avoid code
runaway.
Table 15-41. Program Once Command FCCOB Requirements
CCOBIX[2:0]
000
001
FCCOB Parameters
0x07
Not Required
Program Once phrase index (0x0000 - 0x0007)
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
Freescale Semiconductor
549