English
Language : 

DS031 Datasheet, PDF (50/318 Pages) Xilinx, Inc – Summary of Features
R
Virtex-II Platform FPGAs: DC and Switching Characteristics
Table 2: Recommended Operating Conditions
Symbol
Description
Temperature Range and Grade
VCCINT Internal supply voltage relative to GND
VCCAUX Auxiliary supply voltage relative to GND
VCCO Supply voltage relative to GND
VBATT(1) Battery voltage relative to GND
TJ = 0 °C to +85°C
TJ = –40°C to +100°C
TJ = 0 °C to +85°C
TJ = –40°C to +100°C
TJ = 0 °C to +85°C
TJ = –40°C to +100°C
TJ = 0 °C to +85°C
TJ = –40°C to +100°C
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
Notes:
1. If battery is not used, connect VBATT to GND or VCCAUX.
2. Recommended maximum voltage droop for VCCAUX is 10 mV/ms.
3. The thresholds for Power On Reset are VCCINT > 1.2V, VCCAUX > 2.5V, and VCCO (Bank 4) > 1.5 V.
4. Limit the noise at the power supply to be within 200 mV peak-to-peak.
5. For power bypassing guidelines, see XAPP623 at www.xilinx.com.
Min
1.425
1.425
3.135
3.135
1.2
1.2
1.0
1.0
Max
1.575
1.575
3.465
3.465
3.6
3.6
3.6
3.6
Units
V
V
V
V
V
V
V
V
Table 3: DC Characteristics Over Recommended Operating Conditions
Symbol
Description
Device Min Max Units
VDRINT Data retention VCCINT voltage
All
1.2
V
VDRI Data retention VCCAUX voltage
All
2.5
V
IREF VREF current per pin
All
–10
+10
μA
IL
Input leakage current
All
–10
+10
μA
CIN Input capacitance
All
10
pF
IRPU Pad pull-up (when selected) @ VIN = 0 V, VCCO = 3.3 V (sample tested)
All
Note (1) 250
μA
IRPD Pad pull-down (when selected) @ VIN = 3.6 V (sample tested)
All
Note (1) 250
μA
IBATT Battery supply current
All
(Note 2)
nA
Notes:
1. Internal pull-up and pull-down resistors guarantee valid logic levels at unconnected input pins. These pull-up and pull-down resistors
do not guarantee valid logic levels when input pins are connected to other circuits.
2. Battery supply current (IBATT):
Device
Unpowered
Device
Powered
Units
25°C:
< 50
< 10
nA
85°C:
N/A
< 10
nA
DS031-3 (v3.5) November 5, 2007
Product Specification
www.xilinx.com
Module 3 of 4
2