M306H7MG-XXXFP Datasheet, PDF (273/329 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER

M306H7MG-XXXFP/MC-XXXFP/FGFP
16. ELECTRICAL CHARACTERISTICS
Timing Requirements
(VCC1 = VCC2 = 3V, VSS = 0V, at Topr = – 20 to 70°C unless otherwise specified)
Table 16.26
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Timer A Input (Counter Input in Event Counter Mode)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
VCC1 = VCC2 = 3V
Standard
Min. Max.
Unit
150
ns
60
ns
60
ns
Table 16.27 Timer A Input (Gating Input in Timer Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
VCC1 = VCC2 = 3V
Standard
Min. Max.
Unit
600
ns
300
ns
300
ns
Table 16.28
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Timer A Input (External Trigger Input in One-shot Timer Mode)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
VCC1 = VCC2 = 3V
Standard
Unit
Min. Max.
300
ns
150
ns
150
ns
Table 16.29 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol
tw(TAH)
tw(TAL)
Parameter
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
VCC1 = VCC2 = 3V
Standard
Min.
Max.
Unit
150
ns
150
ns
Table 16.30
Symbol
tc(UP)
tw(UPH)
tw(UPL)
tsu(UP-TIN)
th(TIN-UP)
Timer A Input (Counter Increment/decrement Input in Event Counter Mode)
Parameter
TAiOUT input cycle time
TAiOUT input HIGH pulse width
TAiOUT input LOW pulse width
TAiOUT input setup time
TAiOUT input hold time
VCC1 = VCC2 = 3V
Standard
Min. Max.
Unit
3000
ns
1500
ns
1500
ns
600
ns
600
ns
Rev.2.10 Oct 25, 2006 Page 273 of 326
REJ03B0152-0210