English
Language : 

M306H7MG-XXXFP Datasheet, PDF (1/329 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
M306H7MG-XXXFP/MC-XXXFP/FGFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
with DATA ACQUISITION CONTROLLER
REJ03B0152-0210
Rev.2.10
Oct 25, 2006
1. DESCRIPTION
The M306H7MG/MC-XXXFP and M306H7FGFP are single-chip microcomputers using the high-
performance silicon gate CMOS process using M16C/62 Series CPU core and is packaged in a 100-pin
plastic molded QFP. This single-chip microcomputer operates using sophisticated instructions featuring a
high level of instruction efficiency. With 1M bytes of address space, this is capable of executing instructions
at high speed. This also features a built-in data slicer, making this correspondence to Global broadcasting
service.
1.1 Features
• Memory capacity ..............................ROM Mask version : 256 K/128 K bytes
Flash memory version : 256 K bytes
RAM Mask version : 8 K/5 K bytes
Flash memory version : 8 K bytes
• Shortest instruction execution time ..62.5 ns (f(XIN)=16 MHz)
• Supply voltage ..................................VCC1=3.00 V to VCC2, VCC2=4.5 V to 5.5 V(at f(XIN)=16 MHz)
VCC1=2.00 V to VCC2, VCC2=2.00 V to 5.5 V(at f(XCIN)=32 kHz)
*VCC2=2.0 V to 2.9 V: Operates only in the low power dissipation
mode
• Interrupts ..........................................25 internal and 8 external interrupt sources, 4 software
interrupt sources; 7 levels
• Multifunction 16-bit timer ..................5 output timers + 6 input timers
• Serial I/O ..........................................6 channels
UART/clock synchronous: 3
Clock synchronous: 2
Multi-master I2C: 1
• DMAC...............................................2 channels (trigger: 24 sources)
• A/D converter ...................................8 bits X 8 channels (Expandable up to 10 channels)
• CRC calculation circuit ....................1 circuit
• Watchdog timer ................................1 line
• Programmable I/O ............................79 lines (P6 to P7, P80 to P84: Can be used as 3.3 V interface)
• Input port ..........................................1 port (P85 shared with NMI pin)
• Clock generating circuit ....................2 built-in circuits
(built-in feedback resistor, external crystal oscillator is required)
• Data slicer ........................................For PDC, VPS, WSS, EPG-J, CC, CC2X, ID-1
1.2 Applications
DVD recorder, HDD recorder
Rev.2.10 Oct 25, 2006 Page 1 of 326
REJ03B0152-0210