M306H7MG-XXXFP Datasheet, PDF (226/329 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER

M306H7MG-XXXFP/MC-XXXFP/FGFP
14. EXPANSION FUNCTION
38. Address 3316 (=DA5 to 0)
DD15
0
DD8DD7
0
DD0
Bit symbol
Bit name
RMHTD1(0)
Remote control header length
selection bit
Function
Refer to RMHTD0 (0) to (8)
(address 3216).
RMHTD1(1)
RW
RMHTD1(2)
RMHTD1(3)
RMHTD1(4)
RMHTD1(5)
RMHTD1(6)
RMHTD1(7)
RMHTD1(8)
FILDIV0
Clock division value of remote ^{Clock division value for Remote control tolerance period}
control pulse selection bit
measurement is selected. (Note 1)
FILDIV0 Sub clock divided value
0
No divided
1
2
Reserved bit
Must set to "0. "
FILON
VERTX
Filter ON/OFF of remote control 0 OFF
pulse selection bit (Notes 2, 3) _{1 ON}
Synchronous detection
reset bit
0 Reset
1 Horizontal synchronized signal count
Reserved bit
Must set to "0. "
FILDIV1(0)
Filter of remote control clock
divide value selection bit
FILDIV1(1)
FILDIV1(1)
0
0
1
1
FILDIV1(0) Sub clock divided value
0
2
1
4
0
8
1
16
Notes 1. Refer to RMHTD0 (0) to (8) (address 3216)
Notes 2. Change these bits at initialization and do not rewrite during remote control receive.
Notes 3. The remote control pulse filter is only for the sub clock. Set it to OFF
when the sub clock is not mounted.
39. Address 3416 (=DA5 to 0)
DD15
DD8DD7
DD0
01110000
Bit symbol
Reserved bits
Reserved bits
Bit name
Function
Must set to "7016."
RW
×
Must set to "DD16" when EPG-J is _×
acquired.
Otherwise, set to "0016."
Rev.2.10 Oct 25, 2006 Page 226 of 326
REJ03B0152-0210