M306H7MG-XXXFP Datasheet, PDF (270/329 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER

M306H7MG-XXXFP/MC-XXXFP/FGFP
16. ELECTRICAL CHARACTERISTICS
Timing Requirements
(VCC1 = VCC2 = 5V, VSS = 0V, at Topr = – 20 to 70°C unless otherwise specified)
Table 16.14 Timer A Input (Counter Input in Event Counter Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
VCC1 = VCC2 = 5V
Standard
Min. Max.
Unit
100
ns
40
ns
40
ns
Table 16.15 Timer A Input (Gating Input in Timer Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
VCC1 = VCC2 = 5V
Standard
Min. Max.
Unit
400
ns
200
ns
200
ns
Table 16.16 Timer A Input (External Trigger Input in One-shot Timer Mode)
VCC1 = VCC2 = 5V
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
Standard
Unit
Min. Max.
200
ns
100
ns
100
ns
Table 16.17 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol
tw(TAH)
tw(TAL)
Parameter
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
VCC1 = VCC2 = 5V
Standard
Min.
Max.
Unit
100
ns
100
ns
Table 16.18 Timer A Input (Counter Increment/decrement Input in Event Counter Mode)
Symbol
tc(UP)
tw(UPH)
tw(UPL)
tsu(UP-TIN)
th(TIN-UP)
Parameter
TAiOUT input cycle time
TAiOUT input HIGH pulse width
TAiOUT input LOW pulse width
TAiOUT input setup time
TAiOUT input hold time
VCC1 = VCC2 = 5V
Standard
Min. Max.
Unit
2000
ns
1000
ns
1000
ns
400
ns
400
ns
Rev.2.10 Oct 25, 2006 Page 270 of 326
REJ03B0152-0210