|
HD6475348R Datasheet, PDF (297/487 Pages) Hitachi Semiconductor – Single-Chip Microcomputer | |||
|
◁ |
Section 15 A/D Converter
15.1 Overview
The H8/534 and H8/536 have an analog-to-digital converter module which can be programmed
for input of analog signal on up to eight channels. A/D conversion is performed by the successive
approximations method with 10-bit resolution.
15.1.1 Features
The features of the on-chip A/D module are:
⢠Eight analog input channels
⢠Sample and hold circuit
⢠10-Bit resolution
⢠Rapid conversion
Conversion time is 13.8 µs per channel (at ø = 10 MHz)
⢠Single and scan modes
â Single mode: A/D conversion is performed once.
â Scan mode: A/D conversion is performed in a repeated cycle on one to four channels.
⢠Four 16-bit data registers
These registers store A/D conversion results for up to four channels.
⢠A/D conversion can be started by external trigger input.
⢠A CPU interrupt (ADI) can be requested at the completion of each A/D conversion cycle.
This interrupt can also be served by the on-chip data transfer controller (DTC), providing a
convenient way to move results into memory.
283
|
▷ |