HD6475348R Datasheet, PDF (186/487 Pages) Hitachi Semiconductor – Single-Chip Microcomputer

Bit 2—Port 6 PWM Enable (P6PWME): Controls pin functions of port 6.
Bit 2
P6PWME Description
0
P63 to P61 function as input/output pins
(Initial value)
(or as IRQ input pins when bits IRQ5E to IRQ3E are set to 1).
1
P63 to P61 function as PWM output pins if the corresponding OE bit of PWM3 to PWM1
is set to 1. If the OE bit is cleared to 0 or the IRQE bit is set to 1, the pin functions as an
input/output pin.
Bit 1—Port 9 PWM Enable (P9PWME): Controls pin functions of port 9.
Bit 1
P9PWME Description
0
The PWM functions of P94 to P92 are disabled.
(Initial value)
(See section 9.10.3, “Pin Functions.”)
1
The PWM functions of P94 to P92 are enabled. (See section 9.10.3, “Pin Functions.”)
Bit 0—Port 9 SCI2 Enable (P9PWME): Controls pin functions of port 9.
Bit 1
P9SCI2E
0
1
Description
The serial communication interface functions of P94 to P92
(Initial value)
are disabled. (See section 9.10.3, “Pin Functions.”)
The serial communication interface functions of P94 to P92 are enabled. (See section
9.10.3, “Pin Functions.”)
169