HD6475348R Datasheet, PDF (195/487 Pages) Hitachi Semiconductor – Single-Chip Microcomputer

9.10 Port 9
9.10.1 Overview
Port 9 is an 8-bit input/output port with the pin configuration shown in figure 9-21. In addition to
general-purpose input and output, its pins are used for the output compare A signals from free-
running timers 2 and 3, for PWM timer output, and for input and output by the on-chip serial
communication interfaces (SCI1 and SCI2). The pin functions are the same in all MCU operating
modes.
Outputs from port 9 can drive one TTL load and a 30 pF capacitive load. They can also drive a
Darlington transistor pair.
P97 (input/output) / SCK1 (input/output)
P96 (input/output) / RXD1 (input)
P95 (input/output) / TXD1 (output)
Port
P94 (input/output) / SCK2 (input/output)* / PW3 (output)
9
P93 (input/output) / RXD2 (input)* / PW2 (output)
P92 (input/output) / TXD2 (output)* / PW1 (output)
P91 (input/output) / FTOA3 (output)
P90 (input/output) / FTOA2 (output)
* The SCI2 functions of P92, P93, and P94 cannot be combined with the PWM functions.
Figure 9-21 Pin Functions of Port 9
9.10.2 Port 9 Registers
Register Configuration: Table 9-16 lists the registers of port 9.
Table 9-16 Port 9 Registers
Name
Port 9 data direction register
Port 9 data register
Abbreviation
P9DDR
P9DR
Read/Write
W
R/W
Initial Value
H'00
H'00
Address
H'FEFE
H'FEFF
178