TCC76 Datasheet, PDF (239/259 Pages) List of Unclassifed Manufacturers – 32-bit RISC Microprocessor For Digital Media Player

TCC76x
Specification Rev. 0.07
32-bit RISC Microprocessor for Digital Media Player
February 23, 2005
USB 2.0 & CARD INTERFACE
22 USB 2.0 & CARD INTERFACE
This section describes USB 2.0 device controller and Memory Card Interface block in the TCC766 and TCC767.
22.1 Overview
• USB 2.0 Interface
- USB Specification 2.0 & 1.1 Compliant
- Supports High Speed Transfers (480Mbit/sec)
- Supports Full Speed Transfers (12Mbit/sec)
- Supports Four Endpoints :
Endpoint 0 : 64 Bytes CONTROL transfer
Endpoint 1 : 512*2 Bytes BULK IN transaction
Endpoint 2 : 512*2 Bytes BULK OUT transaction
Endpoint 3 : 64 Bytes INTERRUPT IN transaction
• Memory Card Interfaces
- Memory Stick (MS)
- Memory Stick PRO(MSPRO)
- SecureDigital Card (SD)
- MultiMedia Card (MMC)
- Build-in NAND Flash Memory
• Memory Stick / Memory Stick PRO Interface
- Fully compatible with the Memory Stick Standard Format Specification Version 1.4
- Fully compatible with the Memory Stick PRO Standard Format Specification Version 1.00
- Auto Data CRC generating & checking
- Memory Stick Support capacity 4/8/16/32/64/128MB
- Memory Stick PRO Support capacity 256/512/1024MB
• Secure Digital Card / MultiMedia Card Interface
- Fully compatible with MultiMediaCard System Specification 3.0
- Fully compatible with Secure Digital Specification 1.01
- MMC Support capacity 4/8/16/32/64/128MB
- SD Support capacity 4/8/16/32/64/128/256/512MB
- Auto Data CRC generating & checking
- Auto Command/Response CRC generating & checking
- Standard MMC/SPI/SD 4-bit mode interface support
• Build-In NAND Flash Memory Interface
- Build-in hardware ECC circuit (Hamming & Reed-Solomon).
- Support SLC(Single Level Cell) NAND Flash Memory. Ex: 128Mb,256Mb,512Mb,1Gb.
- Support Big Block(2K+64 Bytes per page) NAND Flash Memory. Ex: 1Gb, 2Gb, 4Gb.
- Support MLC(Multi Level Cell) NAND flash. Ex: 512Mb, 1Gb.
Preliminary
22-1