TCC76 Datasheet, PDF (236/259 Pages) List of Unclassifed Manufacturers – 32-bit RISC Microprocessor For Digital Media Player

TCC76x
Specification Rev. 0.07
32-bit RISC Microprocessor for Digital Media Player
February 23, 2005
JTAG DEBUG INTERFACE
21.1 Debugging with OPENice32 & AIJI Spider
OPENice32 is a powerful and convenient emulator for ARM processor. It provides the
best debugging solution for Telechips ARM processor, TCC76x series. A powerful
debugger, AIJI Spider, is supplied with OPENice32.
It also provides a TCC76x device file and flash device file.
To debug the target system using TCC76x with OPENice32, you should set the Boot
Mode as development mode. Refer to the Boot Procedure chapter to set the Boot Mode.
For more information, refer to OPENice32 manual or application note.
System Configuration
OPENice32 is connected to the host PC with serial, USB or Ethernet that provides high
speed downloading. It is connected to the target JTAG connector with a 20-way cable.
USB/Ethernet
JTAG
TCC76X
Telechips
Host PC
OPENice32
Target System
Figure 21.2 Connection between Host PC and OPENice32 and Target System
Preliminary
21-2