SDA6000 Datasheet, PDF (349/380 Pages) Infineon Technologies AG – Teletext Decoder with Embedded 16-bit Controller

SDA 6000
Slicer and Acquisition
Line Parameters
Note: Line parameters only work on slicer 1 and have no influence on slicer 2.
ACQLP0
Reset Value: XXXX_H
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DINCR(15..0)
Bit
DINCR
(15 … 0)
ACQLP1
Function
Specifies the frequency of the D-PLL of slicer 1. This parameter is used
to configure the D-PLL output frequency according to the service used.
DINCR = f_data × 2¹⁸ / 33.33 MHz
f_data [MHz]
6.9375
5.7273
5.0
1.006993
DINCR
54559
45041
39321
7920
Reset Value: XXXX_H
15 14 13 12 11 10 9
0
0
0
0
0
0
0
8 76 5 432 1 0
0 ACCU PLLT LOWP PFIL GDPO GDNO FRE NOI
ON ON ON ON N
N ON ON
Users Manual
12 - 18
2000-06-15