SDA6000 Datasheet, PDF (29/380 Pages) Infineon Technologies AG – Teletext Decoder with Embedded 16-bit Controller

SDA 6000
Pin Descriptions
Table 2-1 Pin Definition and Functions (cont’d)
Pin Pin Name Second Dir. Function
No.
Function
83 P3.9
MTSR
I/O General purpose I/O port/SSC master-
transmit/slave-receiver O/I
88 P3.10
TxD0
I/O General purpose I/O port/ASC0 clock/data
output
89 P3.11
RxD0
I/O General purpose I/O port/ASC0 data input
(asynchronous) or I/O (synchronous.)
90 P3.12
–
I/O General purpose I/O port
91 P3.13
SCLK
I/O General purpose I/O port/SSC master clock
output/slave clock input
92 P3.15
–
I/O General purpose I/O port
124 P5.0
AN.0
I General purpose I/O port/Analog input for
A/D-converter
125 P5.1
AN.1
I General purpose I/O port/Analog input for
A/D-converter
126 P5.2
AN.2
I General purpose I/O port/Analog input for
A/D-converter
127 P5.3
AN.3
I General purpose I/O port/Analog input for
A/D-converter
93 P5.14
T4EUD
I/O General purpose I/O port/GPT1 timer T4
ext.up/down ctrl. input
94 P5.15
T2EUD
I/O General purpose I/O port/GPT1 timer T2
ext.up/down ctrl. input
95 P6.0
TRIG_IN I/O General purpose I/O port/Trigger input-signal
for ‘On Chip Debug System’ (OCDS)
96 P6.1
TRIG_OUT I/O General purpose I/O port/Trigger output-
signal for ‘On Chip Debug System’ (OCDS)
97 P6.2
98 P6.3
99 P6.4
–
SCL1
SDA1
I/O General purpose I/O port
I/O General purpose I/O port/I²C bus clock line 1
I/O General purpose I/O port/I²C bus data line 1
100 P6.5
101 P6.6
–
SDA2
I/O General purpose I/O port
I/O General purpose I/O port/I²C bus data line 2
1
TCK
–
I Clock for JTAG interface
3
TDI
–
I Data input for JTAG interface
Users Manual
2-7
2000-06-15