M16C80 Datasheet, PDF (237/358 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/80 SERIES

M16C/80 Group
28. Electrical characteristics
Table 28.2 Recommended operating conditions (referenced to VCC = 2.7V to 5.5V at Topr = – 20
to 85^oC / – 40 to 85^oC(Note3) unless otherwise specified)
Symbol
Vcc
AVcc
Supply voltage
Analog supply voltage
Parameter
Standard
Min Typ. Max. ^Unit
2.7
5.0
5.5
V
Vcc
V
Vss
Supply voltage
0
V
AVss _{Analog supply voltage}
0
V
HIGH input
voltage
P40-P47, P50-P57, P60-P67,
P72-P77, P80-P87, P90-P97, P100-P107,
P110-P114, P120-P127,P130-P137, P140-P146,
P150-P157 (Note 5),XIN, RESET, CNVSS, BYTE
VIH
P70 ,P71
P00-P07, P10-P17, P20-P27, P30-P37
(during single-chip mode)
0.8Vcc
0.8Vcc
0.8Vcc
Vcc
V
6.5
V
Vcc
V
P00-P07, P10-P17, P20-P27, P30-P37
0.5Vcc
(data input function during memory expansion and microprocessor modes)
Vcc
V
LOW input
voltage
P40-P47, P50-P57, P60-P67,
P70-P77, P80-P87, P90-P97, P100-P107,
P110-P114, P120-P127,P130-P137, P140-P146,
P150-P157 (Note 5), XIN, RESET, CNVSS, BYTE
0
0.2Vcc V
VIL
P00-P07, P10-P17, P20-P27, P30-P37
(during single-chip mode)
0
0.2Vcc V
P00-P07, P10-P17, P20-P27, P30-P37
(data input function during memory expansion and microprocessor modes)
0
0.16Vcc V
I OH (peak)
I OH (avg)
I OL (peak)
I OL (avg)
HIGH peak output
current
HIGH average output
current
LOW peak output
current
LOW average
output current
P00-P07, P10-P17, P20-P27, P30-P37
P40-P47, P50-P57, P60-P67, P72-P77,
P80-P84, P86, P87, P90-P97, P100-P107,
P110-P114, P120-P127,P130-P137, P140-P146,
P150-P157 (Note 5)
P00-P07, P10-P17, P20-P27, P30-P37
P40-P47, P50-P57, P60-P67, P72-P77,
P80-P84, P86, P87, P90-P97, P100-P107,
P110-P114, P120-P127,P130-P137, P140-P146,
P150-P157 (Note 5)
P00-P07, P10-P17, P20-P27, P30-P37
P40-P47, P50-P57, P60-P67, P70-P77,
P80-P84, P86, P87, P90-P97, P100-P107,
P110-P114, P120-P127,P130-P137, P140-P146,
P150-P157 (Note 5)
P00-P07, P10-P17, P20-P27, P30-P37
P40-P47, P50-P57, P60-P67, P70-P77,
P80-P84, P86, P87, P90-P97, P100-P107,
P110-P114, P120-P127,P130-P137, P140-P146,
P150-P157 (Note 5)
-10.0
mA
-5.0
mA
10.0
mA
5.0
mA
Main clock input oscillation frequency _{No wait Vcc=4.2V to 5.5V}
f (XIN)
0
20 MHz
Vcc=2.7V to 4.2V
0
10 MHz
f (XcIN) _{Subclock oscillation frequency}
32.768
50
kHz
Note 1: The mean output current is the mean value within 100ms.
Note 2: The total IOL (peak) for ports P0, P1, P2, P86, P87, P9, P10, P11, P14 and P15 must be 80mA max. The total
IOH (peak) for ports P0, P1, P2, P86, P87, P9, P10, P11, P14 and P15 must be -80mA max. The total IOL (peak)
for ports P3, P4, P5, P6, P7,P80 to P84, P12 and P13 must be 80mA max. The total IOH (peak) for ports P3, P4,
P5, P6, P72 to P77, P80 to P84, P12 and P13 must be -80mA max.
Note 3: Specify a product of -40 to 85°C to use it.
Note 4: The specification of VIH and VIL of P87 is not when using as XCIN but when using programmable input port.
Note 5: Port P11 to P15 exist in 144-pin version.
Rev.1.00 Aug. 02, 2005 ^{Page 226} of 329
REJ09B0187-0100