M16C80 Datasheet, PDF (116/358 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/80 SERIES

M16C/80 Group
13. Timer A
Condition : Reload register = 000316, when external trigger
(rising edge of TAiIN pin input signal) is selected
1 / fi X (2¹⁶ – 1)
Count source
TAiIN pin
“H”
input signal
“L”
PWM pulse output ^{“H”}
from TAiOUT pin
“L”
Timer Ai interrupt “1”
request bit
“0”
Trigger is not generated by this signal
1 / fi X n
fi : Frequency of count source
(f1, f8, f32, fC32)
Cleared to “0” when interrupt request is accepted, or cleared by software
Note: n = 000016 to FFFE16.
Figure 13.12 Example of how a 16-bit pulse width modulator operates
Condition : Reload register high-order 8 bits = 0216
Reload register low-order 8 bits = 0216
External trigger (falling edge of TAiIN pin input signal) is selected
1 / fi X (m + 1) X (2⁸ – 1)
Count source (Note1)
TAiIN pin input signal ^{“H”}
“L”
Underflow signal of ^{“H”}
8-bit prescaler (Note2) _{“L”}
PWM pulse output ^{“H”}
from TAiOUT pin
“L”
Timer Ai interrupt
“1”
request bit
“0”
1 / fi X (m + 1)
1 / fi X (m + 1) X n
fi : Frequency of count source
(f1, f8, f32, fC32)
Cleared to “0” when interrupt request is accepted, or cleaerd by software
Note 1: The 8-bit prescaler counts the count source.
Note 2: The 8-bit pulse width modulator counts the 8-bit prescaler's underflow signal.
Note 3: m = 0016 to FE16; n = 0016 to FE16.
Figure 13.13 Example of how an 8-bit pulse width modulator operates
Rev.1.00 Aug. 02, 2005 ^{Page 105} of 329
REJ09B0187-0100