English
Language : 

M16C80 Datasheet, PDF (214/358 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/80 SERIES
M16C/80 Group
26. Programmable I/O Ports
Function select register B3
b7 b6 b5 b4 b3 b2 b1 b0
Symbol
PSL3
Address
03B716
When reset
00000X0X2
Bit symbol
Bit name
Function
RW
Nothing is assigned.
When write, set "0". When read, the content is indeterminate.
PSL3_1 Port P91 peripheral function 0 : SCL3 output
select bit
1 : STxD3 output
Nothing is assigned.
When write, set "0". When read, the content is indeterminate.
PSL3_3
Port P93 peripheral function
0 : Input peripheral function
enabled (Except DA0 output)
(Note)
1 : Input peripheral function
disabled (DA0 output)
PSL3_4
Port P94 peripheral function
0 : Input peripheral function
enabled (Except DA1 output)
(Note)
1 : Input peripheral function
disabled (DA1 output)
PSL3_5
PSL3_6
Port P95 peripheral function
Port P96 peripheral function
0 : Input peripheral function
enabled (Except ANEX0 use)
(Note)
1 : Input peripheral function
disabled (ANEX0 use)
0 : Input peripheral function
enabled (Except ANEX1 use)
(Note)
1 : Input peripheral function
disabled (ANEX1 use)
PSL3_7 Port P97 peripheral function 0 : SCL4 output
select bit
1 : STxD4 output
Note: Although DA0, DA1 output and ANEX0, ANEX1 can be used when "0" is set in
these bits, the power supply may be increased.
Figure 26.11 Function select register B (2)
Function select register C
b7 b6 b5 b4 b3 b2 b1 b0
Symbol
PSC
Address
03AF16
When reset
0XXXXXX02
Bit symbol
Bit name
Function
RW
PSC_0
(Note 1)
Port P72 peripheral subfunction
0 : CLK2 output
select bit (Enabled when PS1_2 = 1 : V phase output
1 and PSL1_2 = 0)
Nothing is assigned.
When write, set "0". When read, the content is indeterminate.
PSC_7 Key input interrupt disable bit
(Note 2)
0 : Enabled
1 : Disabled
Note 1: Set this bit to "0" when PSL1_2 = "1".
Note 2: When this bit is "1", key input interrupt for interrupt controller is disabled
regardless of port input and setting of interrupt control register.
When changing this bit, set key input interrupt disabled by key input interrupt
control register.
Figure 26.12 Function select register C
Rev.1.00 Aug. 02, 2005 Page 203 of 329
REJ09B0187-0100