MC9S12HZ256 Datasheet, PDF (608/692 Pages) Freescale Semiconductor, Inc – HCS12 Microcontrollers

Chapter 22 Module Mapping Control (MMCV4)
22.3.2.2 Initialization of Internal Registers Position Register (INITRG)
7
6
5
4
3
2
1
0
R
0
0
0
0
REG14
REG13
REG12
REG11
W
Reset
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 22-4. Initialization of Internal Registers Position Register (INITRG)
Read: Anytime
Write: Once in normal and emulation modes and anytime in special modes
This register initializes the position of the internal registers within the on-chip system memory map. The
registers occupy either a 1K byte or 2K byte space and can be mapped to any 2K byte space within the first
32K bytes of the system’s address space.
Table 22-3. INITRG Field Descriptions
Field
Description
6:3
Internal Register Map Position — These four bits in combination with the leading zero supplied by bit 7 of
REG[14:11] INITRG determine the upper five bits of the base address for the system’s internal registers (i.e., the minimum
base address is 0x0000 and the maximum is 0x7FFF).
MC9S12HZ256 Data Sheet, Rev. 2.04
608
Freescale Semiconductor