MC9S12HZ256 Datasheet, PDF (217/692 Pages) Freescale Semiconductor, Inc – HCS12 Microcontrollers

Chapter 7 Analog-to-Digital Converter (ATD10B16CV4)
7.3.2.4 ATD Control Register 3 (ATDCTL3)
This register controls the conversion sequence length, FIFO for results registers and behavior in Freeze
Mode. Writes to this register will abort current conversion sequence but will not start a new sequence.
7
R
0
W
Reset
0
Read: Anytime
Write: Anytime
6
S8C
5
S4C
4
S2C
3
S1C
2
FIFO
0
1
0
0
0
= Unimplemented or Reserved
Figure 7-6. ATD Control Register 3 (ATDCTL3)
Table 7-8. ATDCTL3 Field Descriptions
1
FRZ1
0
0
FRZ0
0
Field
6
S8C
5
S4C
4
S2C
3
S1C
Description
Conversion Sequence Length — This bit controls the number of conversions per sequence. Table 7-9 shows
all combinations. At reset, S4C is set to 1 (sequence length is 4). This is to maintain software continuity to HC12
Family.
Conversion Sequence Length — This bit controls the number of conversions per sequence. Table 7-9 shows
all combinations. At reset, S4C is set to 1 (sequence length is 4). This is to maintain software continuity to HC12
Family.
Conversion Sequence Length — This bit controls the number of conversions per sequence. Table 7-9 shows
all combinations. At reset, S4C is set to 1 (sequence length is 4). This is to maintain software continuity to HC12
Family.
Conversion Sequence Length — This bit controls the number of conversions per sequence. Table 7-9 shows
all combinations. At reset, S4C is set to 1 (sequence length is 4). This is to maintain software continuity to HC12
Family.
MC9S12HZ256 Data Sheet, Rev. 2.04
Freescale Semiconductor
217