English
Language : 

MC9S12HZ256 Datasheet, PDF (483/692 Pages) Freescale Semiconductor, Inc – HCS12 Microcontrollers
Chapter 16 Timer Module (TIM16B8CV1)
Read: Anytime
Write: Anytime
Table 16-2. TIOS Field Descriptions
Field
7:0
IOS[7:0]
Description
Input Capture or Output Compare Channel Configuration
0 The corresponding channel acts as an input capture.
1 The corresponding channel acts as an output compare.
16.3.2.2 Timer Compare Force Register (CFORC)
R
W
Reset
7
0
FOC7
0
6
5
4
3
2
0
0
0
0
0
FOC6
FOC5
FOC4
FOC3
FOC2
0
0
0
0
0
Figure 16-7. Timer Compare Force Register (CFORC)
Read: Anytime but will always return 0x0000 (1 state is transient)
Write: Anytime
Table 16-3. CFORC Field Descriptions
1
0
FOC1
0
0
0
FOC0
0
Field
Description
7:0
FOC[7:0]
Force Output Compare Action for Channel 7:0 — A write to this register with the corresponding data bit(s) set
causes the action which is programmed for output compare “x” to occur immediately. The action taken is the
same as if a successful comparison had just taken place with the TCx register except the interrupt flag does not
get set.
Note: A successful channel 7 output compare overrides any channel 6:0 compares. If forced output compare on
any channel occurs at the same time as the successful output compare then forced output compare action
will take precedence and interrupt flag won’t get set.
16.3.2.3 Output Compare 7 Mask Register (OC7M)
R
W
Reset
7
OC7M7
0
Read: Anytime
Write: Anytime
6
OC7M6
5
OC7M5
4
OC7M4
3
OC7M3
2
OC7M2
0
0
0
0
0
Figure 16-8. Output Compare 7 Mask Register (OC7M)
1
OC7M1
0
0
OC7M0
0
MC9S12HZ256 Data Sheet, Rev. 2.04
Freescale Semiconductor
483