MC9S12HZ256 Datasheet, PDF (243/692 Pages) Freescale Semiconductor, Inc – HCS12 Microcontrollers

8.2 External Signal Description
The LCD32F4B module has a total of 37 external pins.
Chapter 8 Liquid Crystal Display (LCD32F4BV1)
Name
4 backplane waveforms
32 frontplane waveforms
LCD voltage
Table 8-1. Signal Properties
Port
Function
BP[3:0] Backplane waveform signals
that connect directly to the pads
FP[31:0] Frontplane waveform signals
that connect directly to the pads
VLCD LCD supply voltage
Reset State
High impedance
High impedance
—
8.2.1 BP[3:0] — Analog Backplane Pins
This output signal vector represents the analog backplane waveforms of the LCD32F4B module and is
connected directly to the corresponding pads.
8.2.2 FP[31:0] — Analog Frontplane Pins
This output signal vector represents the analog frontplane waveforms of the LCD32F4B module and is
connected directly to the corresponding pads.
8.2.3 VLCD — LCD Supply Voltage Pin
Positive supply voltage for the LCD waveform generation.
8.3 Memory Map and Register Definition
This section provides a detailed description of all memory and registers.
8.3.1 Module Memory Map
The memory map for the LCD32F4B module is given in Table 8-2. The address listed for each register is
the address offset. The total address for each register is the sum of the base address for the LCD32F4B
module and the address offset for each register.
MC9S12HZ256 Data Sheet, Rev. 2.04
Freescale Semiconductor
243