EP2S130F1020I4 Datasheet, PDF (556/768 Pages) List of Unclassifed Manufacturers – Stratix II Device Handbook, Volume 1

Configuration Features
Table 7–3. Stratix II GX Uncompressed .rbf Sizes
Device
EP2SGX30C
EP2SGX30D
EP2SGX60C
EP2SGX60D
EP2SGX60E
EP2SGX90E
EP2SGX90F
EP2SGX130G
Data Size (Bits)
9,640,672
16,951,824
25,699,104
37,325,760
Note to Table 7–3:
(1) .rbf: Raw Binary File.
Note (1)
Data Size (MBytes)
1.205
2.119
3.212
4.666
f
Use the data in Table 7–2 to estimate the file size before design
compilation. Different configuration file formats, such as a Hexidecimal
(.hex) or Tabular Text File (.ttf) format, will have different file sizes.
However, for any specific version of the Quartus^® II software, any design
targeted for the same device will have the same uncompressed
configuration file size. If you are using compression, the file size can vary
after each compilation because the compression ratio is dependent on the
design.
This chapter explains the Stratix II and Stratix II GX device configuration
features and describes how to configure Stratix II and Stratix II GX
devices using the supported configuration schemes. This chapter
provides configuration pin descriptions and the Stratix II and
Stratix II GX device configuration file formats. In this chapter, the generic
term device(s) includes all Stratix II and Stratix II GX devices.
For more information on setting device configuration options or creating
configuration files, refer to Software Settings in volume 2 of the
Configuration Handbook.
Configuration
Features
Stratix II and Stratix II GX devices offer configuration data
decompression to reduce configuration file storage, design security using
data encryption to protect your designs, and remote system upgrades to
allow for remotely updating your Stratix II and Stratix II GX designs.
Table 7–4 summarizes which configuration features can be used in each
configuration scheme.
7–4
Stratix II Device Handbook, Volume 2
Altera Corporation
January 2008