1N4007 Datasheet, PDF (98/236 Pages) Naina Semiconductor ltd. – General Purpose Rectifier 1.0A

TMS320C6652, TMS320C6654
SPRS841D – MARCH 2012 – REVISED JUNE 2016
www.ti.com
6.6.2.9 Reset Isolation Register (RSISO)
This register is used to select the module clocks that must maintain their clocking without pausing through
non power-on reset. Setting any of these bits blocks reset to all PLLCTL registers in order to maintain
current values of PLL multiplier, divide ratios, and other settings. Along with setting module specific bit in
RSISO, the corresponding MDCTLx[12] bit also must be set in PSC to reset-isolate a particular module.
For more information on MDCTLx Register, see the Power Sleep Controller (PSC) for KeyStone Devices
User's Guide. The Reset Isolation Register (RSISO) is shown in Figure 6-12 and described in Table 6-18.
Figure 6-12. Reset Isolation Register (RSISO)
31
10
9
8
7
0
Reserved
Reserved
SRISO
Reserved
R-0
R/W-0
R/W-0
R-0
Legend: R = Read only; R/W = Read/Write; -n = value after reset
BIT
31-10
9
8
FIELD
Reserved
Reserved
SRISO
7-0 Reserved
Table 6-18. Reset Isolation Register (RSISO) Field Descriptions
DESCRIPTION
Reserved.
Reserved.
Isolate SmartReflex
• 0 = Not reset isolated
• 1 = Reset Isolated
Reserved.
98
Detailed Description
Copyright © 2012–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320C6652 TMS320C6654