1N4007 Datasheet, PDF (52/236 Pages) Naina Semiconductor ltd. – General Purpose Rectifier 1.0A

TMS320C6652, TMS320C6654
SPRS841D – MARCH 2012 – REVISED JUNE 2016
www.ti.com
5.7.9 SPI Peripheral
The serial peripheral interconnect (SPI) module provides an interface between the DSP and other SPI-
compliant devices. The primary intent of this interface is to allow for connection to an SPI ROM for boot.
The SPI module on the C6654 and C6652 is supported only in master mode. Additional chip-level
components can also be included, such as temperature sensors or an I/O expander.
5.7.9.1 SPI Timing
(See Figure 5-11.)
NO.
7
tsu(SDI-SPC)
7
tsu(SDI-SPC)
7
tsu(SDI-SPC)
7
tsu(SDI-SPC)
8
th(SPC-SDI)
8
th(SPC-SDI)
8
th(SPC-SDI)
8
th(SPC-SDI)
Table 5-11. SPI Timing Requirements
Master Mode Timing Diagrams — Base Timings for 3-Pin Mode
Input Setup Time, SPIDIN valid before receive edge of SPICLK. Polarity = 0 Phase = 0
Input Setup Time, SPIDIN valid before receive edge of SPICLK. Polarity = 0 Phase = 1
Input Setup Time, SPIDIN valid before receive edge of SPICLK. Polarity = 1 Phase = 0
Input Setup Time, SPIDIN valid before receive edge of SPICLK. Polarity = 1 Phase = 1
Input Hold Time, SPIDIN valid after receive edge of SPICLK. Polarity = 0 Phase = 0
Input Hold Time, SPIDIN valid after receive edge of SPICLK. Polarity = 0 Phase = 1
Input Hold Time, SPIDIN valid after receive edge of SPICLK. Polarity = 1 Phase = 0
Input Hold Time, SPIDIN valid after receive edge of SPICLK. Polarity = 1 Phase = 1
MIN MAX UNIT
2
ns
2
ns
2
ns
2
ns
5
ns
5
ns
5
ns
5
ns
52
Specifications
Copyright © 2012–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320C6652 TMS320C6654