1N4007 Datasheet, PDF (93/236 Pages) Naina Semiconductor ltd. – General Purpose Rectifier 1.0A

www.ti.com
TMS320C6652, TMS320C6654
SPRS841D – MARCH 2012 – REVISED JUNE 2016
6.6.2.4 PLLDIV Divider Ratio Change Status Register (DCHANGE)
When a different ratio is written to the PLLDIVn registers, the PLLCTL flags the change in the DCHANGE
Status Register. During the GO operation, the PLL controller will change only the divide ratio of the
SYSCLKs with the bit set in DCHANGE. The ALNCTL Register determines if that clock also must be
aligned to other clocks. The PLLDIV divider ratio change status register is shown in Figure 6-7 and
described in Table 6-13.
Figure 6-7. PLLDIV Divider Ratio Change Status Register (DCHANGE)
31
8
7
6
5
Reserved
SYS8 Reserved
R-0
R/W-0
R-0
Legend: R/W = Read/Write; R = Read only; -n = value after reset, for reset value
4
SYS5
R/W-0
3
2
Reserved
R-0
1
SYS2
R/W-0
0
Reserved
R-0
Table 6-13. PLLDIV Divider Ratio Change Status Register (DCHANGE) Field Descriptions
BIT
31-8
7
FIELD
Reserved
SYS8
6-5
Reserved
4
SYS5
3-2
Reserved
1
SYS2
0
Reserved
DESCRIPTION
Reserved. The reserved bit location is always read as 0. A value written to this field has no effect.
Identifies when the SYSCLKn divide ratio has been modified.
• 0 = SYSCLKn ratio has not been modified. When GOSET is set, SYSCLKn will not be affected.
• 1 = SYSCLKn ratio has been modified. When GOSET is set, SYSCLKn will change to the new ratio.
Reserved. The reserved bit location is always read as 0. A value written to this field has no effect.
Identifies when the SYSCLKn divide ratio has been modified.
• 0 = SYSCLKn ratio has not been modified. When GOSET is set, SYSCLKn will not be affected.
• 1 = SYSCLKn ratio has been modified. When GOSET is set, SYSCLKn will change to the new ratio.
Reserved. The reserved bit location is always read as 0. A value written to this field has no effect.
Identifies when the SYSCLKn divide ratio has been modified.
• 0 = SYSCLKn ratio has not been modified. When GOSET is set, SYSCLKn will not be affected.
• 1 = SYSCLKn ratio has been modified. When GOSET is set, SYSCLKn will change to the new ratio.
Reserved. The reserved bit location is always read as 0. A value written to this field has no effect.
Copyright © 2012–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320C6652 TMS320C6654
Detailed Description
93