SH7708 Datasheet, PDF (158/625 Pages) Renesas Technology Corp – SuperH™ RISC engine

Bit 2—Module Standby 2 (MSTP2): Specifies halting the clock supply to the timer unit TMU (an
on-chip supporting module). When the MSTP2 bit is set to 1, the supply of the clock to the TMU
is halted.
Bit 2: MSTP2
0
1
Description
TMU runs.
value)
Clock supply to TMU is halted.
(Initial
Bit 1—Module Standby 1 (MSTP1): Specifies halting the clock supply to the realtime clock RTC
(an on-chip supporting module). When the MSTP1 bit is set to 1, the supply of the clock to RTC
is halted. When the clock halts, all RTC registers become inaccessible, but the counter keeps
running.
Bit 1: MSTP1
0
1
Description
RTC runs.
value)
Clock supply to RTC is halted.
(Initial
Bit 0—Module Standby 0 (MSTP0): Specifies halting the clock supply to the serial
communication interface SCI (an on-chip supporting module). When the MSTP0 bit is set to 1,
the supply of the clock to the SCI is halted.
Bit 0: MSTP0
0
1
Description
SCI operates.
value)
Clock supply to SCI is halted.
(Initial
144