W90P710_05 Datasheet, PDF (313/526 Pages) Winbond – 16/32-bit ARM microcontroller

W90P710
31
30
23
22
15
14
7
6
Reserved
29
21
13
5
AC_BCLK_
PU_EN
28
27
Reserved
20
19
Reserved
12
11
Reserved
4
3
AC_R_FINI AC_W_FINI
SH
SH
26
18
10
2
AC_W_RE
S
25
24
17
16
9
8
1
0
AC_C_RES Reserved
BITS
[6]
[5]
[4]
[3]
DESCRIPTIONS
Reserved
-
AC_BCLK_PU_EN
This bit controls the AC_BCLK pin pull-high resister.
AC_BCLK_PU_EN=0, the AC_BCLK pin pull-high resister will be
disabled
AC_BCLK_PU_EN=1, the AC_BCLK pin pull-high resister will be
enabled
The AC_BCLK_PU_EN bit is read/write.
AC_R_FINISH
AC-link read data ready bit. When read data indexed by previous
frame is shifted into ACTL_ACIS2, the AC_R_FINISH bit will be
set to 1 automatically. After CPU read out the read data,
AC_R_FINISH bit will be cleared to 0.
AC_R_FINISH=0, read data buffer has been read by CPU
AC_R_FINISH=1, read data buffer is ready for CPU read
The AC_R_FINISH bit is read only
AC_W_FINISH
AC-link write frame finish bit. When writing data to register
ACTL_ACOS0, the AC_W_FINISH bit will be set to 1
automatically. After AC-link interface shift out the register
ACTL_ACOS0, the AC_W_FINISH bit will be cleared to 0.
AC_W_FINISH=0, AC-link control data out buffer has been shifted
out to codec by CPU and data out buffer is empty.
AC_W_FINISH=1, AC-link control data out buffer is ready to be
shifted out(After users have wrote data into register
ACTL_ACOS0)
The AC_W_FINISH bit is read only
- 313 -
Publication Release Date: January 17, 2005
Revision A.2