W90P710_05 Datasheet, PDF (250/526 Pages) Winbond – 16/32-bit ARM microcontroller

W90P710
Continued.
BITS
[2]
CD_IS
[1]
DO_IS
[0]
DI_IS
DESCRIPTIONS
CD# Interrupt Status
0=No Interrupt Generated
1=Interrupt Generated
Note: Write “1” into this bit will clear the interrupt status.
Data Output Interrupt Status
0=No Interrupt Generated
1=Interrupt Generated
Note: Write “1” into this bit will clear the interrupt status.
Data Input Interrupt Status
0=No Interrupt Generated
1=Interrupt Generated
Note: Write “1” into this bit will clear the interrupt status.
SD Command Argument Register (SDAUG)
REGISTER ADDRESS
SDARG 0xFFF0_7310
R/W
DESCRIPTION
R/W SD Command Argument Register
31
30
29
28
27
26
SD_CMD_ARG
23
22
21
20
19
18
SD_CMD_ARG
15
14
13
12
11
10
SD_CMD_ARG
7
6
5
4
3
2
SD_CMD_ARG
RESET VALUE
0x0000_0000
25
24
17
16
9
8
1
0
BITS
[31:0]
SD_CMD_AR
G
DESCRIPTIONS
SD Command Argument
This register contains a 32-bit value specifies the argument of SD
command from host controller to card.
SD Receive Response Token Register 0 (SDRSP0)
- 250 -