|
W90P710_05 Datasheet, PDF (302/526 Pages) Winbond – 16/32-bit ARM microcontroller | |||
|
◁ |
W90P710
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
Reserved
7
FIFO_TH
14
13
12
11
10
9
Reserved Reserved R_DMA_IRQ T_DMA_IRQ
Reserved
6
5
Reserved
4
Reserved
3
2
1
BLOCK_EN[1:0]
8
IIS_AC_PIN_S
EL
0
Reserved
BITS
[15]
[14]
[13]
[12]
[11]
[8]
[7]
[6]
Reserved
Reserved
Reserved
R_DMA_IRQ
T_DMA_IRQ
IIS_AC_PIN_SEL
FIFO_TH
Reserved
DESCRIPTIONS
-
-
-
When recording, when the DMA destination current address reach the DMA
destination end address or middle address, the R_DMA_IRQ bit will be set to
1 automatically, and this bit could be cleared to 0 by CPU. The bit is
hardwired to ARM as interrupt request signal with an inverter.
The R_DMA_IRQ bit is read/write (write 1 to clear)
Transmit DMA interrupt request bit. When DMA current address reach the
middle address (((ACTL_DESE â ACTL_DESB)-1)/2 + ACTL_DESB) or
reach the end address ACTL_DESB, the bit T_DMA_IRQ will be set to 1, and
this bit could be clear to 0 by write â1â by CPU. And the bit is hardwired to
ARM as interrupt request signal with an inverter.
The T_DMA_IRQ bit is read/write (write 1 to clear).
IIS or AC-link pin selection
⢠If IIS_AC_PIN_SEL = 0, the pins select IIS
⢠If IIS_AC_PIN_SEL = 1, the pins select AC-link
The IIS_AC_PIN_SEL bis is read/write
FIFO threshold control bit
⢠If FIFO_TH=0, the FIFO threshold is 8 level
⢠If FIFO_TH=1, the FIFO threshold is 4 level
The FIFO_TH bit is read/write
- 302 -
|
▷ |