W90P710_05 Datasheet, PDF (135/526 Pages) Winbond – 16/32-bit ARM microcontroller

W90P710
Continued.
BITS
[20]
[19]
[18]
[17]
DESCRIPTIONS
EnNCS
The Enable No Carrier Sense Interrupt controls the NCS interrupt
generation. If NCS of MISTA register is set, and both EnNCS and
EnTXINTR are enabled, the EMC generates the Tx interrupt to CPU. If
EnNCS or EnTXINTR is disabled, no Tx interrupt is generated to CPU
even the NCS of MISTA register is set.
1’b0: NCS of MISTA register is masked from Tx interrupt generation.
1’b1: NCS of MISTA register can participate in Tx interrupt generation.
EnEXDEF
The Enable Defer Exceed Interrupt controls the EXDEF interrupt
generation. If EXDEF of MISTA register is set, and both EnEXDEF and
EnTXINTR are enabled, the EMC generates the Tx interrupt to CPU. If
EnEXDEF or EnTXINTR is disabled, no Tx interrupt is generated to
CPU even the EXDEF of MISTA register is set.
1’b0: EXDEF of MISTA register is masked from Tx interrupt generation.
1’b1: EXDEF of MISTA register can participate in Tx interrupt
generation.
EnTXCP
The Enable Transmit Completion Interrupt controls the TXCP
interrupt generation. If TXCP of MISTA register is set, and both
EnTXCP and EnTXINTR are enabled, the EMC generates the Tx
interrupt to CPU. If EnTXCP or EnTXINTR is disabled, no Tx interrupt
is generated to CPU even the TXCP of MISTA register is set.
1’b0: TXCP of MISTA register is masked from Tx interrupt generation.
1’b1: TXCP of MISTA register can participate in Tx interrupt
generation.
EnTXEMP
The Enable Transmit FIFO Underflow Interrupt controls the TXEMP
interrupt generation. If TXEMP of MISTA register is set, and both
EnTXEMP and EnTXINTR are enabled, the EMC generates the Tx
interrupt to CPU. If EnTXEMP or EnTXINTR is disabled, no Tx interrupt
is generated to CPU even the TXEMP of MISTA register is set.
1’b0: TXEMP of MISTA register is masked from Tx interrupt
generation.
1’b1: TXEMP of MISTA register can participate in Tx interrupt
generation.
- 135 -
Publication Release Date: January 17, 2005
Revision A.2