W90P710_05 Datasheet, PDF (170/526 Pages) Winbond – 16/32-bit ARM microcontroller

W90P710
Channel 0/1 Current Destination Register (GDMA_CDST0, GDMA_CDST1)
REGISTER
ADDRESS R/W
DESCRIPTION
RESET VALUE
GDMA_CDST0 0xFFF0_4014
R
Channel 0 Current Destination Address
Register
0x0000_0000
GDMA_CDST1 0xFFF0_4034
R
Channel 1 Current Destination Address
Register
0x0000_0000
31
30
23
22
15
14
7
6
29
28
27
26
25
24
CURRENT_DST_ADDR [31:24]
21
20
19
18
17
16
CURRENT_DST_ADDR [23:16]
13
12
11
10
9
8
CURRENT_DST_ADDR [15:8]
5
4
3
2
1
0
CURRENT_DST_ADDR [7:0]
BITS
[31:0]
DESCRIPTIONS
CURRENT_DST_ADDR
The 32-bit Current Destination Address indicates the
destination address where the GDMA transfer is just
occurring. During a block transfer, the GDMA determines
the successive destination addresses by adding to or
subtracting from the destination base address. Depending
on the settings you make to the control register, the current
destination address will remain the same or will be
incremented or decremented.
Channel 0/1 Current Transfer Count Register (GDMA_CTCNT0,
GDMA_CTCNT1)
The Current transfer count register indicates the number of transfer being performed.
REGISTER
ADDRESS R/W
DESCRIPTION
GDMA_CTCNT0 _{0xFFF0_4018}
GDMA_CTCNT1 _{0xFFF0_4038}
R ^{Channel 0 Current Transfer Count Register}
R ^{Channel 1 Current Transfer Count Register}
RESET
VALUE
0x0000_0000
0x0000_0000
- 170 -