English
Language : 

M16C6K9 Datasheet, PDF (272/292 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M16C/6K9 Group
Functions To Inhibit Rewriting Flash Memory
ID code check function
The function is used in standard serial I/O mode. If the flash memory is not blank, the ID code sent from serial
burner is compared with that inside flash memory to check the agreement. It the ID codes do not match, the
commands from serial burner are not accepted. Each ID code consists of 8-bit data, the areas of which,
beginning from the 1st byte, are 0FFFDF16, 0FFFE316, 0FFFEB16, 0FFFEF16, 0FFFF316, 0FFFF716,
0FFFFB16. Write a program with the ID code at these addresses to the flash memory.
Address
0FFFDC16 to 0FFFDF16 ID1
0FFFE016 to 0FFFE316 ID2
0FFFE416 to 0FFFE716
0FFFE816 to 0FFFEB16 ID3
0FFFEC16 to 0FFFEF16 ID4
0FFFF016 to 0FFFF316 ID5
0FFFF416 to 0FFFF716 ID6
0FFFF816 to 0FFFFB16 ID7
0FFFFC16 to 0FFFFF16
Undefined instruction vector
Overflow vector
BRK instruction vector
Address match vector
Single step vector
Watchdog timer vector
DBC vector
NMI vector
Reset vector
Fig.BB-7 ROM ID code addresses
4 bytes
Rev.1.00 Jun 06, 2003 page 272 of 290