M16C6K9 Datasheet, PDF (248/292 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

M16C/6K9 Group
Electrical characteristics
Table.ZA-3 Recommended operating conditions (referenced to Vcc=3.0V to 3.6V,Ta= -20 to 85^oC)
Symbol
Parameter
Standard
Min.
Typ.
Max. ^Unit
"H"peak output
I OH (peak) current
P00 to P07, P10 to P17,P20 to P27,P30 to P37,P40 to P47,
P50 to P57,P64 to P67,P86 to P87,P90 to P97,P100 to P107,
P110 to P117, P120 to P127,P140 to P147,P150 to P157,
P160,P161
-10.0
mA
"L"peak output
I OL (peak) current
P00 to P07, P10 to P17,P30 to P37,P40 to P47,
P50 to P57,P60 to P67,P76 to P77,P80 to P84, P86 to P87,
P90 to P97,P100 to P107, P110 to P117,P120 to P127,
P130 to P137,P144 to P147, P150 to P157,P160,P161
10.0
mA
I OL (peak)
"L"peak output
current
P20 to P27
P140 to P143
Driven ability:High
Driven ability:Low
20.0
mA
20.0
mA
10.0
mA
I OH (avg)
I OL (avg)
I OL (avg)
"H" average output P00 to P07, P10 to P17,P20 to P27,P30 to P37,
current
P40 to P47,P50 to P57,P60 to P67,P86 to P87,P90 to P97,
P100 to P107, P110 to P117, P120 to P127,P140 to P147,
P150 to P157,P160,P161
"L"average output
current
P00 to P07, P10 to P17,P30 to P37, P40 to P47,
P50 to P57,P60 to P67,P76 to P77,P80 to P84, P86 to P87,
P90 to P97,P100 to P107,P110 to P117,P120 to P127,
P130 to P137,P140 to P147,P150 to P157,P160,P161
P20 to P27
"L"average output P140 to P143
current
Driven ability:High
Driven ability:Low
-5.0
mA
5.0
mA
15.0
mA
15.0
mA
5.0
mA
f (XIN)
Main clock input
oscillation frequency
0
16 MHz
Subclock oscillation
f (XcIN) _frequency
32.768
50
kHz
Note1 : The average output current is the average value during the 100ms period limited current.
Note2 : The value are as follow:
The sum of IOL (peak) of P0,P1,P2,P86 to P87,P9,P10,P11,P120 to P126,P153 to P157 P16 should be under 80mA.
The sum of IOH (peak) of P0,P1,P2,P86 to P87,P9,P10,P11,P120 to P126,P153 to P157 P16 should be under 80mA.
The sum of IOL (peak) of P3,P4,P5,P6,P7,P80 to P84,P13,P14,P150 to P152 should be under 80mA.
The sum of IOH (peak) of P3,P4,P5,P64 to P67,P14,P150 to P152 should be under 80mA.
Rev.1.00 Jun 06, 2003 page 248 of 290