MC68HC08AZ16 Datasheet, PDF (77/527 Pages) Motorola, Inc – HCMOS Microcontroller Unit

System Integration Module (SIM)
Clocks in STOP
and WAIT mode
Upon exit from STOP mode (by an interrupt, break, or reset), the SIM
allows CGMXCLK to clock the SIM counter. The CPU and peripheral
clocks do not become active until after the STOP delay timeout. This
timeout is selectable as 4096 or 32 CGMXCLK cycles. See STOP mode
on page 89.
In WAIT mode, the CPU clocks are inactive. The SIM also produces two
sets of clocks for other modules. Refer to the WAIT mode subsection of
each module to see if the module is active or inactive in WAIT mode.
Some modules can be programmed to be active in WAIT mode.
MC68HC08AZ32
76
System Integration Module (SIM)
6-sim
MOTOROLA