English
Language : 

MC68HC08AZ16 Datasheet, PDF (395/527 Pages) Motorola, Inc – HCMOS Microcontroller Unit
SpeciÞcations
Maximum Ratings
Maximum ratings are the extreme limits to which the MCU can be
exposed without permanently damaging it.
NOTE:
This device is not guaranteed to operate at the maximum ratings. Refer
to 5.0 Volt DC Electrical Characteristics on page 396 for guaranteed
operating conditions.
Rating
Symbol
Supply Voltage
VDD
Input Voltage
VIN
Maximum Current Per Pin
Excluding VDD and VSS
I
Storage Temperature
TSTG
Maximum Current out of VSS
IMVSS
Maximum Current into VDD
IMVDD
Reset IRQ Input Voltage
VHI
NOTE: Voltages are referenced to VSS.
Value
–0.3 to +6.0
VSS –0.3 to VDD +0.3
± 25
–55 to +150
100
100
VDD to VDD + 2
Unit
V
V
mA
°C
mA
mA
V
NOTE:
This device contains circuitry to protect the inputs against damage due
to high static voltages or electric fields; however, it is advised that normal
precautions be taken to avoid application of any voltage higher than
maximum-rated voltages to this high-impedance circuit. For proper
operation, it is recommended that VIN and VOUT be constrained to the
range VSS ≤ (VIN or VOUT) ≤ VDD. Reliability of operation is enhanced if
unused inputs are connected to an appropriate logic voltage level (for
example, either VSS or VDD).
MC68HC08AZ32
394
Specifications
2--specs
MOTOROLA