English
Language : 

MC68HC08AZ16 Datasheet, PDF (390/527 Pages) Motorola, Inc – HCMOS Microcontroller Unit
msCAN08 Controller (msCAN08)
Programmer’s model of control registers
IDHIT1- IDHIT0— Identifier Acceptance Hit Indicator
The msCAN08 sets these flags to indicate an identifier acceptance hit
(see Identifier acceptance filter on page 356). Table 11 summarizes
the different settings.
Table 11. Identifier Acceptance Hit Indication
IDHIT1
0
0
1
1
IDHIT0
0
1
0
1
Identifier Acceptance Hit
Filter 0 Hit
Filter 1 Hit
Filter 2 Hit
Filter 3 Hit
The IDHIT indicators are always related to the message in the
foreground buffer. When a message gets copied from the background to
the foreground buffer the indicators are updated as well.
NOTE: The CIDAC register can only be written if the SFTRES bit in the
msCAN08 Module Control Register is set.
msCAN08 Receive
Error Counter
(CRXERR)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
CRXERR R RXERR7 RXERR6 RXERR5 RXERR4 RXERR3 RXERR2 RXERR1 RXERR0
$xx0E W
RESET 0
0
0
0
0
0
0
0
= Unimplemented
Figure 23. Receive Error Counter
This register reflects the status of the msCAN08 receive error counter.
The register is read only.
43-can
MOTOROLA
msCAN08 Controller (msCAN08)
MC68HC08AZ32
389