MC68HC908GR16 Datasheet, PDF (57/310 Pages) Motorola, Inc – Microcontrollers

Freescale Semiconductor, Inc.
Analog-to-Digital Converter (ADC)
I/O Registers
3.8.2.4 Eight Bit Truncation Mode
In 8-bit truncation mode, the ADRL register holds the eight MSBs of the 10-bit
result. The ADRH register is unused and reads as 0. The ADRL register is updated
each time an ADC single channel conversion completes. In 8-bit mode, the ADRL
register contains no interlocking with ADRH.
Address: $003D
ADRH
Bit 7
6
5
4
3
2
1
Bit 0
Read: 0
0
0
0
0
0
0
0
Write:
Reset:
Unaffected by reset
Address: $003E
ADRL
Read: AD9
AD8
AD7
AD6
AD5
AD4
AD3
AD2
Write:
Reset:
Unaffected by reset
= Unimplemented
Figure 3-8. ADC Data Register High (ADRH) and Low (ADRL)
3.8.3 ADC Clock Register
The ADC clock register (ADCLK) selects the clock frequency for the ADC.
Address: $003F
Bit 7
6
5
4
3
2
1
Bit 0
Read:
0
ADIV2 ADIV1 ADIV0 ADICLK MODE1 MODE0
R
Write:
Reset: 0
0
0
0
0
1
0
0
= Unimplemented
R
= Reserved
Figure 3-9. ADC Clock Register (ADCLK)
ADIV2–ADIV0 — ADC Clock Prescaler Bits
ADIV2–ADIV0 form a 3-bit field which selects the divide ratio used by the ADC
to generate the internal ADC clock. Table 3-2 shows the available clock
configurations. The ADC clock should be set to approximately 1 MHz.
MC68HC908GR16 — Rev. 1.0
MOTOROLA
Analog-to-Digital Converter (ADC)
For More Information On This Product,
Go to: www.freescale.com
Data Sheet
57