MC68HC908GR16 Datasheet, PDF (46/310 Pages) Motorola, Inc – Microcontrollers

Memory
Freescale Semiconductor, Inc.
2.6.3 Stop Mode
NOTE:
Putting the MCU into stop mode while the FLASH is in read mode does not affect
the operation of the FLASH memory directly, but there will not be any memory
activity since the CPU is inactive.
The STOP instruction should not be executed while performing a program or erase
operation on the FLASH, otherwise the operation will discontinue, and the FLASH
will be on standby mode
Standby mode is the power saving mode of the FLASH module in which all internal
control signals to the FLASH are inactive and the current consumption of the
FLASH is at a minimum.
Data Sheet
46
Memory
For More Information On This Product,
Go to: www.freescale.com
MC68HC908GR16 — Rev. 1.0
MOTOROLA