MC68HC908GR16 Datasheet, PDF (213/310 Pages) Motorola, Inc – Microcontrollers

Freescale Semiconductor, Inc.
System Integration Module (SIM)
SIM Registers
15.7.2 SIM Reset Status Register
This register contains six flags that show the source of the last reset provided all
previous reset status bits have been cleared. Clear the SIM reset status register by
reading it. A power-on reset sets the POR bit and clears all other bits in the register.
Address: $FE01
Bit 7
6
5
4
3
2
1
Bit 0
Read: POR
PIN
COP
ILOP
ILAD MODRST LVI
0
Write:
Reset: 1
0
0
0
0
0
0
0
= Unimplemented
Figure 15-22. SIM Reset Status Register (SRSR)
POR — Power-On Reset Bit
1 = Last reset caused by POR circuit
0 = Read of SRSR
PIN — External Reset Bit
1 = Last reset caused by external reset pin (RST)
0 = POR or read of SRSR
COP — Computer Operating Properly Reset Bit
1 = Last reset caused by COP counter
0 = POR or read of SRSR
ILOP — Illegal Opcode Reset Bit
1 = Last reset caused by an illegal opcode
0 = POR or read of SRSR
ILAD — Illegal Address Reset Bit (opcode fetches only)
1 = Last reset caused by an opcode fetch from an illegal address
0 = POR or read of SRSR
MODRST — Monitor Mode Entry Module Reset Bit
1 = Last reset caused by monitor mode entry when vector locations $FFFE
and $FFFF are $FF after POR while IRQ = V_DD
0 = POR or read of SRSR
LVI — Low-Voltage Inhibit Reset Bit
1 = Last reset caused by the LVI circuit
0 = POR or read of SRSR
MC68HC908GR16 — Rev. 1.0
MOTOROLA
System Integration Module (SIM)
For More Information On This Product,
Go to: www.freescale.com
Data Sheet
213