|
MC68HC908MR8 Datasheet, PDF (65/372 Pages) Motorola, Inc – Microcontrollers | |||
|
◁ |
FLASH Memory
FLASH Programming Algorithm
4.3.3.2 Stop Mode
If the FLASH is in read mode, when the MCU is put into stop mode, the
FLASH will be put into low-power standby mode.
The STOP instruction should never be executed while performing a
program or erase operation on the FLASH. Otherwise the operation will
be discontinued and the FLASH will be in standby mode.
NOTE:
Standby mode is the power-saving mode of the FLASH module, in which
all internal control signals to the FLASH are inactive and the current
consumption of the FLASH is minimum.
MC68HC908MR8 â Rev 4.1
Freescale Semiconductor
FLASH Memory
Technical Data
65
|
▷ |