MC68HC908MR8 Datasheet, PDF (107/372 Pages) Motorola, Inc – Microcontrollers

System Integration Module (SIM)
Low-Power Mode
SBSW can be read within the break state SWI routine. The user can
modify the return address on the stack by subtracting one from it. The
following code is an example of this. Writing 0 to the SBSW bit
clears it.
; This code works if the H register has been pushed onto the stack in the break
; service routine software. This code should be executed at the end of the break
; service routine software.
HIBYTE EQU
5
LOBYTE EQU
6
;
If not SBSW, do RTI
BRCLR SBSW,SBSR, RETURN ; See if wait mode was exited by break.
;
TST
LOBYTE,SP
; If RETURNLO is not zero,
BNE
DOLO
; then just decrement low byte.
DEC
HIBYTE,SP
; Else deal with high byte, too.
DOLO
DEC
LOBYTE,SP
; Point to WAIT opcode.
RETURN PULH
RTI
; Restore H register.
MC68HC908MR8 — Rev 4.1
Freescale Semiconductor
System Integration Module (SIM)
Technical Data
107