SH7137 Datasheet, PDF (541/1160 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 12 Port Output Enable (POE)
Initial
Bit
Bit Name
value R/W Description
9
MTU2SP2CZE 1
R/W* MTU2S Port 2 Output Comparison/High-Impedance
Enable
This bit specifies whether to compare output levels on
the large current pins for the MTU2S, PE18/TIOC4AS
and PE20/TIOC4CS, and to place them in the high-
impedance state when the OSF2 bit is set to 1 while
the OCE2 bit is 1 or when any one of the POE4F,
POE5F, POE6F, and MTU2SHIZ bits is set to 1.
0: Does not compare output levels or place the pins in
the high-impedance state
1: Compares output levels and places the pins in the
high-impedance state
8
MTU2SP3CZE 1
R/W* MTU2S Port 3 Output Comparison/High-Impedance
Enable
This bit specifies whether to compare output levels on
the large current pins for the MTU2S, PE19/TIOC4BS
and PE21/TIOC4DS, and to place them in the high-
impedance state when the OSF2 bit is set to 1 while
the OCE2 bit is 1 or when any one of the POE4F,
POE5F, POE6F, and MTU2SHIZ bits is set to 1.
0: Does not compare output levels or place the pins in
the high-impedance state
1: Compares output levels and places the pins in the
high-impedance state
7 to 0 
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
Note: * Can be modified only once after a power-on reset.
Rev. 2.00 Sep. 10, 2008 Page 515 of 1130
REJ09B0402-0200